Polycrystalline wire drawing die (PCD/CD)
Polycrystalline wire drawing die is divided into two types: import polycrystalline modulus using the American GE, Japan's sumitomo material (raw materials) and domestic CD material.According to the performance of all kinds of wire drawing die, the price system, suitable for non-ferrous metals, ferrous metals, all kinds of wire and hard metal wire drawing.Such as low carbon steel wire, welding wire, stainless steel wire, cutting wire, tungsten molybdenum wire, etc., especially suitable for large size and wear of wire drawing wire diameter size.
My company polycrystalline wire drawing die four flour with sets of imported metal powder technology, sintered metal powder hardness HRC55.Guaranteeing the out of roundness of wire rod and has high surface finish, drawing long life, in the process of drawing for a long time hard to wear and flat wire.
Standard product catalogue
| Category | Model | Wire drawing die aperture (mm) | Recommended maximum aperture (mm) | Commonly used mold core granularity μm | ||
| Import PCD & local CD without support | D6 | 0.02-0.60 | 0.6 | 1, 3, 5, 10/12 | ||
| D12 | 0.30-0.80 | 0.8 | 1, 3, 5, 10/12 | |||
| D42 | 0.50-1.20 | 1.2 | 3, 5, 10, 25 | |||
| D15 | 1.00-1.50 | 1.5 | 3, 5, 10/12, 25 | |||
| D18 | 1.30-2.00 | 2.0 | 5, 10/12, 25 | |||
| D21 | 1.80-2.80 | 2.8 | 5, 10/12, 25 | |||
| D24 | 2.50-3.50 | 3.5 | 5, 10/12, 25 | |||
| D27 | 3.00-5.00 | 5.0 | 5, 10/12, 25 | |||
| D30 | 4.00-7.00 | 7.0 | 5, 10/12, 25 | |||
| D31 | 5.00-8.00 | 8.0 | 5, 10/12, 25 | |||
| D33 | 6.00-9.00 | 9.0 | 5, 10/12, 25 | |||
| Import PCD & local CD supported | D12 | 0.30-1.00 | 1.0 | 1, 3, 5, 10/12 | ||
| D15 | 1.00-1.50 | 1.5 | 1, 3, 5, 10/12 | |||
| D18 | 1.30-2.00 | 2.0 | 3, 5, 10/12, 25 | |||
| D21 | 1.80-3.00 | 3.0 | 5, 10/12, 25 | |||
| D24 | 2.50-4.00 | 4.0 | 5, 10/12, 25 | |||
| D27 | 3.00-5.50 | 5.8 | 5, 10/12, 25 | |||
| D30 | 4.00-7.50 | 7.6 | 5, 10/12, 25 | |||
| D31 | 5.00-9.00 | 9.0 | 5, 10/12, 25 | |||
| D33 | 6.00-11.00 | 11.0 | 5, 10/12, 25 | |||
| Note: mold using particle size and type can be customized according to customer drawing request. | ||||||
